Clearing the alert log
The alerts stored for a channel can be cleared through the alert log screen. Access
the alert log, display the channel to be cleared, and push the side button. The text
CLrECOrd (clear record) will appear on the bottom of
the display (figure 8). Push the side button again and all
stored alerts for the chosen channel will be cleared.
reset button
If the PR-2500 stops responding correctly, the reset but-
ton should be pushed. The reset button is located inside
the small hole directly below the side button (figure 2).
Insert a pin in the hole and push the button. The unit will
beep and dEFAULt will appear on the bottom of the dis-
play (figure 9). Push the side button and the display will
show PASS and then enter the programming mode. The
time and date will have been reset to the default, and will
need to be reprogrammed.
Figure 8
10.
Figure 9
