4
5
4. Use a small Phillips screwdriver to loosen SIM card cover on dialer
(Figure 2 - 2). Lift up on hinges. Slide black cardholder to the left and
lift. Insert SIM card into the cardholder with the notch on the top
(Figure 3). Close cardholder and slide to the right to lock into place.
Close cover and tighten screw.
5.
(Note: Tamper switch (Figure 2-5) arms automatically when depressed
and will cause alarm 1 to activate when released. Disarm by entering
password code 1234 into dialer followed by the ESC button)
. Install the
back-up battery (included) into the auto dialer. Use a small Phillips screwdriver to remove screw
above battery cover (Figure 2 - 3). Remove cover by sliding downwards. Plug in battery pack
making sure not to force onto pins incorrectly. Put battery pack in space provided, close battery
cover, and replace the screw. Mount Auto Dialer in desired location.
(Note: if tamper switch is not
completely compressed, Auto Dialer will not be able to properly arm. If mounted on an unlevel suface,
a wedge may be required behind the unit.)
6. Continue on to the Advanced Operations to program your dialer or refer to the “CAD-03 Quick
Reference Programming” on page 15.
Figure 3*
* Pictures shown in white for readability.
CAD-03 Kit Manual.indd 5
10/15/2009 10:16:01 AM
