DAKO RDC270NEWWY0, Owner'S Manual

Page: 16 / 29

15
Installation
Unpacking your refrigerator-
freezer
WARNING: TWO OR
MORE PEOPLE ARE
NEEDED TO MOVE THE
APPLIANCE. FAILURE TO
FOLLOW WARNING
COULD RESULT IN BACK
OR OTHER INJURIES.
• Remove tape and any labels from
your refrigerator-freezer before us-
ing (except the rating label).
• To remove any remaining tape or
glue, rub the area briskly with your
thumb.
• Tape or glue residue can also be
easily removed by rubbing a small
amount of liquid dishwashing soap
over the adhesive with your fingers.
Wipe with warm water and dry.
• Do not use sharp instruments, rub-
bing alcohol, flammable fluids, or
abrasive cleaners to remove tape or
glue. These products can damage
the surface of your appliance.
• When moving the appliance, do not
tilt the refrigerator-freezer beyond
45° from upright position.
Cleaning before use
After you remove all of the packaging
materials, (especially the foam be-
tween outside condenser and cabinet
should be removed), clean the inside
of the refrigerator-freezer before us-
ing it.
Space requirements
WARNING: KEEP THE AP-
PLIANCE AWAY FROM
FLAMMABLE MATERIALS
SUCH AS GASOLINE.
FAILURE TO DO SO,
COULD RESULT IN
DEATH, EXPLOSION, FIRE
OR BURNS.
To assure proper ventilation for the
unit, allow 200 mm space on each
side between walls, 200 mm space
between back of your refrigerator-
freezer and the wall, and 300 mm
space between counter top and the
roof or ceiling.
If you are installing your refrigerator-
freezer next to a fixed wall, leave
sufficient space on the hinge side to
allow for the door to open.
Never install the refrigerator near
heat sources and direct sunshine.
Electrical requirements
WARNING: DO NOT RE-
MOVE GROUND PRONG.
DO NOT USE ADAPTER.
DO NOT USE EXTENSION
CORDS. FAILURE TO FOL-
LOW THESE INSTRUC-
TIONS COULD RESULT IN
DEATH, FIRE OR ELEC-
TRIC SHOCK.
Before you move the unit to its final
location, it is important to make sure
you have the proper electrical con-
nection.
R
EFRIGERATOR