manualshive.com logo in svg

DAKEWE DP260, User Manual, Page: 9 / 75

Share
Download
DAKEWE DP260 User Manual Download Page 9

 

 

V1.0

   

20170825

                                                                                                                                               

9

 

                                                           

 

2.  Safety 

Transportation and installation 

 
 
 
 
 
 
 
 
 
 
 

Apparatus operation 

 
 
 
 
 
 
 
 
 
 
 
 

Cleaning and maintenance 

 

Before  maintenance  or  cleaning,  the  apparatus  shall  be  shut  down  and  its  main 
power disconnected. Please do not use any solvent containing acetone or xylene 
to  clean  the  apparatus.  Avoid  the  spill  of  liquid  onto  the  internal  modules  of  the 
apparatus - both during operation and cleaning.

 

When  cleaning  agents  are  used,  please  conform  to  all  safety  requirements  and 
laboratory management policies specified by the product manufacturer.

 

Use  water  at  a  temperature  of  less  than  +65  ℃  to  clean  the  tap  water  washing 
station and reagent station. 

 

Do not use high-temperature water to clean the stations under any circumstance; 
otherwise, the stations may be deformed

 

Spilled solvent (reagent) must be wiped away immediately.  —Long-term action of 
solvent causes erosion to the slide stainer.

 

Please use mild household detergents to clean the lid, control panel and shell.

 

The apparatus shall be transported perpendicularly. 
Four people are required for the elevation / transportation of the apparatus. 
The apparatus must be installed on a horizontal smooth experimental workbench. 
The apparatus shall not be exposed directly to sunlight (beside the window). 
The apparatus must be connected to the grounded main electrical outlet, and shall 
not be connected to a power board without protective earth conductor. 
The apparatus must be installed in a well-ventilated area, and shall be kept away 
from  any  fire  source.  The  chemicals  used  in  slide  stainer  are  inflammable  and 
toxic. The apparatus shall not be used in a room subject to explosion hazard. 
If  there  is  great  temperature  difference  between  the  warehouse  and  apparatus 
installation  place  as  well  as  high  air  humidity,  condensed  water  will  be  formed 
inside the apparatus. IN this case, the operator shall wait at least 2 hours before 
starting the apparatus; otherwise, may be caused damage to the apparatus. 

The  slide  stainer  can  only  be  operated  on  by  trained  laboratory  personnel 
according to the designated purposes and this manual.

 

In case of emergencies, please shut down the power and unplug the power line.

 

During  operation  of  reagents  (padding  /  clearing  reagent  stations,  operating  the 
apparatus when opening the lid), the operator shall wear proper protective devices 
(lab gown, gloves and goggle).

 

It shall be guaranteed that the apparatus is equipped with filter screen or exhaust 
pipe.  Even  if  the  apparatus  is  operated  according  to  the  designated  purposes, 
hazardous  solvent  smoke  can  still  be  generated,  causing  harm  to  operator’s 
health and even fire hazard.

 

There is a risk of ignition when operating near the apparatus! Therefore, a 2-meter 
safe distance must be guaranteed!

 

If it is necessary to discontinue the staining procedures for a relatively long time, do 
not  leave  any  slide  stand  in  the  tap  water  washing  station;  otherwise,  they  will 
become dry.

 

Summary of Contents for DP260












































































Reviews:

No comments