Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
13
REV032019
CUTTING ANGLE-HEAD ROTATION ADJUSTMENT
The machine is supplied with basic positions calibrated at: 0° and 45°
To adjust the cutting angle, proceed as follows:
1. Loosen the locking knobs,
2. Turn the swivel support using the handgrip,
3. Stop rotation when the pointer is aligned with the selected position on the graduated
scale on the base,
4. Lock the swivel support by tightening knobs.
ADJUSTING THE SLIDING BLADE GUIDE POSITION
DANGER - CAUTION
PERFORM ADJUSTMENT OPERATIONS WHENEVER YOU PREPARE A WORK PROCESS
1. Loosen knob that is locking blade guide.
2. Slide the blade guide until it is as close to the workpiece as possible;
3. Simulate the work process to be performed to make sure that there is no interference
and/or contact between the blade guide, the workpiece and other parts of the
machine.
4. Lock the blade guide in position by tightening the knob.
BLADE SPEED ADJUSTMENT
Adjust the cutting speed as indicated in this manual. The device for regulating blade speed is a
rocker switch on top of the control box (8).
Select the speed (196 / 262 fpm) using the rocker switch (15).
POSITIONING OF THE WORKPIECE IN THE VISE
DANGER - WARNING
TO POSITION FLAT OR SPECIAL
SHAPED PROFILES, PLEASE REFER
TO THE EXAMPLES PROVIDED IN
THE DRAWING.
