Dake Atmos, Installation, Use And Maintenance Instruction

Page: 19 / 24

19
SLT975 BRHM
Take the product out of the packaging and place
it on a suitable surface: we suggest to use a soft
material, such as a sponge or a cloth.
Open the glass panel, rotating it as shown in Fig. 1.
Remove the grease filters (Fig. 3).
A recess shall be created , where the applian ce
will be placed, which shall have a
865 x 465 for model SLT975 Cm90
1165 x 615 for model SLT975 Cm120.
and depth ranging from 210mm to 280 mm.
THE RECESS SHALL BE MADE AFTER IN
STAL LING THE APPLIANCE AND ESPECIALLY
AFTER CONNECTING THE AIR OUTLET PIPE.
The recess shall be provided with a socket and a
round pipe of 150mm diameter, or a similar sec-
tion, for the air outlet.
Drill the holes on the ceiling, as shown in Fig. 21,
in sert the plastic plugs into the holes made, and
then fix the ceiling brackets as shown in Fig. 18.
The ceiling brackets are telescopic, so their
height can be adjusted at 70mm between the cei-
ling and the hood.
If you intend to orient the air outlet of the product,
in a different direction from that established in the
factory, you can dismantle the fan (see fig.19),
acting on the four fixing screws, then rotate and
position it as you want, restore the four fixing
screws removed previously.
Bring the hood close to the brackets previously
fixed and then connect the appliance to the sup-
ply mains.
Secure the hood to the ceiling, by using the
screws supplied, as shown in Fig. 20.
WORKING
RC001
R
ADIO
C
ONTROL
Radio control used for the remote operation of
ducted cooker hoods.
TECHNICAL DATA
- Alkaline battery powered: 12V mod. 27A
- Operating frequency: 433.92 Mhz
- Combinations: 32.768
- Max. consumption: 25 mA
- Operating temperature: -20 ÷ + 55 °C
- Dimensions: 130x45x15 mm.
OPERATING DESCRIPTION
The transmitter is equipped with 5 buttons for co-
oker hood management, as specified below:
: Light ON/OFF command.
: Motor ON (speed level 1) / OFF command.
: Reduce speed.
: Increase speed.
: 10-minute timer.
The set suction speed is indicated by the LED in
the suction perimeter channel.
To each color generated by the LED, it corre-
sponds a specific speed, as shown below:
First speed WHITE
Second speed BLUE
Third speed DARK BLUE
Fourth speed RED