Daitsu DS-9KIDR Service Manual Download Page 38

Page: 38 / 89

Air Conditioner Service Manual

3. Maintenance

3.1 Failure code

Code

Reason

Remark

IDU & ODU Communication failure

The IDU & ODU wiring connection correct?

IDU Room Temperature sensor failure.

（

IDU

RT failure

）

IDU sensor and PCB.

IDU Coil temperature sensor failure.

（

IDU IPT

failure

）

IDU sensor and PCB.

ODU Coil temperature sensor failure. (OPT)

ODU coil sensor and ODU PCB

AC Cooling system abnormal

Gas leakage? 2-way or 3-way valve

blocked etc.

IDU/ODU mismatched

failure (specially

performance test on the production line)

IDU PG Fan motor / DC fan motor works

abnormal

（

IDU failure

）

Fan motor, fan blade and PCB.

ODU Ambient Temperature sensor failure

ODU ambient sensor and ODU PCB.

ODU Discharge Temperature sensor failure.

ODU discharge sensor and ODU PCB.

IPM / Compressor driving control abnormal.

ODU PCB , compressor, etc.

ODU Current Test circuit failure

ODU PCB broken?

The Communication abnormal of Main PCB

and Display board

（

IDU failure

）

Display board and main PCB.

ODU EEPROM failure.

1. ODU PCB broken?

2. Try to re-power on AC unit.

ODU DC fan motor failure.

Fan motor, ODU PCB.

ODU Voltage test circuit abnormal.

ODU PCB.

IPM module protection.

ODU PCB

Over / under voltage protection.

1. ODU PCB broken?

2. Power supply abnormal?

Over current protection.

1. ODU PCB broken?

2. Power supply abnormal?

ODU Discharge pipe Over temperature

protection.

Please check the troubleshooting for detail.

Sub-cooling protection on Cooling mode.

Please check the troubleshooting for detail.

Overheating protection on Cooling mode.

Please check the troubleshooting for detail.

Overheating protection on Heating mode.

Please check the troubleshooting for detail.

Outdoor Over temperature/Under temperature

protection.

Please check the troubleshooting for detail.

Compressor driving protection (Load

abnormal).

Please check the troubleshooting for detail.

Communication failure for TOP flow unit/

Preset mode conflict.

（

IDU failure

）

Please check the troubleshooting for detail.

Infrared Customer feeling test sensor failure.

（

IDU failure

）

Querying by press remote controller

Electric Power test module failure.

（

IDU

failure

）

Querying by press remote controller

Discharge temperature sensor failure

PROTECTION.

Please check the troubleshooting for detail.

ODU coil temperature failure PROTECTION.. Please check the troubleshooting for detail.

Summary of Contents for DS-9KIDR


























































































Search results

Summary of Contents for DS-9KIDR

Reviews:

Related manuals for DS-9KIDR

Brands by name

Popular brands

Daitsu DS-9KIDR, Service Manual

Search results

Summary of Contents for DS-9KIDR

Reviews:

Related manuals for DS-9KIDR

Brands by name

Popular brands