Daitsu DS-18UIAK, Owner'S Manual

Page: 44 / 52

Φ
55/70
Drill Piping Hole
1.Slant the piping hole ( Φ 55/70) on the wall slightly downward to the
outdoor side.
2.Insert the piping-hole sleeve into the hole to prevent the connection piping
and wiring from being damaged when passing through the hole.
Indoor Outdoor
Wall pipe
Seal pad
Installation of Mounting Plate
1. Mounting p late should be installed horizontally. As the water tray's outlet for the indoor unit is two-way
type, during installation, the indoor unit should slightly slant to water tray's outlet for smooth drainage of
condensate.
2. Fix the mounting plate on the wall with screws.
3. Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the
weight should be evenly shared by each screw.
Fig.5
1.
2.
Installation of Drain Hose
Connect the drain hose to the outlet pipe of the indoor unit .
Bind the joint with rubber belt.
Put the drain hose into insulating tube.
insulating tube
drain hose
outlet pipe of
indoor unit
drain hose
outlet pipe of
indoor unit
outlet pipe of
indoor unit
rubber belt
rubber belt
18K UNIT:
14
194 52
298
940
82
45
160
256
694
Φ
55
Φ55
24K UNIT:
685
139
184
157
90
36
65
45
315
Φ70
Φ70
- 22 -
Installation of Indoor Unit