112
5.2.1 Testing the radio repeater relay
1.
Press the relay
“test”
button for
more than
5 s
. The LED lights up
green.
2.
The control panel issues
the voice message:
3.
The relay issues a long
beep to confirm.
“beeep”
5.2.2 Testing the remote control unit
1.
Press the
“Off”
button.
2.
The control panel issues
the voice message:
3.
The remote control LED
lights up a steady green
for 1.5 s to confirm.
“beep, disarm,
remote control X”
“beep, test,
device X”
Before fixing the relay and relayed products in place, position them in the intended location
and then test the radio range.
If the tests are satisfactory, fix the relay and relayed products in place. If not, move
them to a different location.
5.2 Testing the radio range
5.2.3 Testing the keypad
1.
Press the
“Off”
button.
2.
The control panel issues
the voice message:
3.
The keypad issues a
long beep to confirm.
“beep, disarm,
remote control X”
IMPORTANT: the keypad must be in installation mode (see keypad installation manual).
“beeep”
