4
IMPORTANT
• Each command n° digit corresponds to the number of times the keyfob is pressed (digit “0” = key pressed 10 times in a row)
• If the red LED flashes three times in a row during or at the end of parameter-setting, you have made a programming error.
When this happens, go through the sequence again from the beginning.
4. Set the parameters
according to the sequence below.
Example of parameter-setting
Personalise key P1 to trigger a “Silent alarm”. The command n° is 24.
red LED
green LED
R
G
about
2 s pause
LED off
LED on
press as
shown
about 5 s
about 10 s
about
1.5 s
about 10 s
about
2 s pause
R
R
R
R
R
R
R
R
R
R
R
R
R
G
To
begin,
simultaneously
press
the
and
keys
until the LED
goes out
Press briefly
on the key
to be
personalised:
,
,
or
Press and hold
the key
until
the LED goes out
and release
the key when
the LED lights up
a 2
nd
time.
Press the key
as many times
as the
1
st
digit
of the
command n°
To end the
sequence press
and hold
the key
until the LED goes
out.
Steady green
LED =
parameters
correctly set.
Select key
Start
Press
to create
a space
Press twice
for the 1
st
digit
Press 4 times
for the 2
nd
digit
2
R
R
R
R
R
R R
4
R R R R
R
R
G
End
Steady green LED =
parameters correctly set
IMPORTANT: a key cannot be set with a TwinBand
®
command n° if an Optwin
®
radio link has already been allocated (unless the
Optwin
®
radio link is deleted).
Verification of parameter setting
of the preceding example
Select key
Start
Press
to create
a space
End
The LED
flashes
twice
to confirm
the 1
st
digit
The LED
flashes
4 times
to confirm
the 2
nd
digit
The green LED lights up
for 1.5 s at the end
of consultation
2
R
R
R
R
R
R
R
R R
4
R R R R
G
4.2 Setting a key to Arm or Disarm groups 1 to 8
The arming or disarming of a group from among the 8 alarm groups available (depending on the type of control panel) can be
programmed by first configuring:
• the Disarm group function (command 121) and associating this with the group(s) to be disarmed,
• the Arm group function (command 123) and associating this with the group(s) to be disarmed.
Example of parameter-setting
Personalising the P1 key to trigger the “Off group” function (command 121) associated with groups 1 and 8.
Press briefly
to select
the
key
To
begin,
simulta -
neously
press
the
and
keys
until the LED
goes out
Press and
hold a key
until the
LED goes
out and
release the
key when
the LED
lights up
a 2
nd
time
Press
once
for the
1
st
digit
“Off Group”
command parameter-setting
Press
twice
for the
2
nd
digit
Press
once
for the
3
rd
digit
Press and
hold a key
until the LED
goes out and
release the
key when the
LED lights up
a 2
nd
time.
Press
once
for group 1
Press
eight
times
for group 8
1
2
1
1
8
R
R
R
R
R
R
R R
R
R
R
R
R
R
R
R
G
To end the
sequence
press and
hold
a key
until the LED
goes out
Steady green
LED =
parameters
correctly set
Groups 1 and 8
associated
red LED
green LED
R
G
red LED
green LED
R
G
Press the key
as many times
as the
2
nd
digit
of the
command n°
Press the key
as many times
as the
3
rd
digit
of the
command n°
