DAITEM SH273AX, Installation Manual, Page: 9 / 13

64
GB
• check detection of protected
entrance opening and closing:
Pressing on the button for more
than 1 sec. causes the control
panel to give a
“Test” message
when the panel is in test or
installation mode .
entrance
open:
the test LED
indicator
lamp lights
up
entrance
closed:
the test LED
indicator
lamp goes
out
)
)
)
)
)
“beep, test detector X,
group Y immediate
(or delayed or combined)”
6.1 Battery low indication
The control panel indicates when
the contact detector’s battery is
low.
To check whether there is a
problem with the detector battery,
press on the detector’s test
button.
If the test LED indicator lamp no
longer lights up, the lithium
battery should be replaced.
6. Maintenance