DAITEM SH273AX, Installation Manual, Page: 6 / 13

61
GB
Cover
Magnet
Spacers
Base
2. Adjust the height of the
magnet holder according to
the diagrams below.
3. Fix the magnet holder base,
place the magnet inside the
cover and clip it to the base.
1. Align the vertical slot on the
magnet holder with the arrow
located on the base of the
detector.
IMPORTANT: the parts must
be laterally aligned and their
height adjusted for the
detector to operate
correctly.
Max :
5 mm
Detector
Magnet holder
Spacers
Spacer
If necessary use the spacer supplied for the magnet holder
or position a spacer below the normally closed detector.
slot-arrow
alignment
Max :
5 mm
35 mm
4.2 Fixing method and installing the magnet holder
Fix the back plate to the wall using 2 screws suitable for wall fixing. When the entrance is closed the magnet
holder must be positioned opposite the built-in contact less than 5 mm away from it.