Installing the DoorPhone
100
➢
Installing the indoor station (mains operated base)
The indoor station must be placed more than 2m away from the controller!
1
2
Mark the two base
mounting holes with
a 6mm dia. drill.
3
Plug in the power jack.
Route the cable through
its channel.
Screw the base
to the wall.
Plug in the mains
transformer.
Re-fit the bases screw
covers.
4
Having screwed the base
to the wall, place the
handset in it’s cradle and it
will beep three times.
The indicator
appears,
showing the handset is
being charged.
5
For ease of use it is
recommended the indoor
station be mounted
approximately 1.5m
from the floor.
Test the radio reception.
At a distance of more than
3m away from the controller,
press the
button.
Watch the radio reception
indicator .
If more than 2 bars are
displayed the level is good.
(1) When the test is done
press .(2)
1,50 m
(1) It is recommended to do this test while moving into other
rooms and going outside, to check the radio reception. If
the level of reception is insufficient please look in the “What
to do if...?.” section of this guide.
(2) 3 minutes after pressing the
key, the handset emits
a resonant BEEP and the
indicator disappears.
