LED.com
© 2024 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Page 4 of 8
Rev 02/26/24
WOS3_InstallSheet_R04
WOS3-PC
Installation Guide
Product Dimensions
To add the WOS3-PC to a ÒRoomÓ involves scanning the QR code and setting the device into network joining mode.
The network joining mode is initiated either when the device is first time powered up or following a factory reset. Prior to
commissioning the WOS3-PC the ÒRoomÓ shall contain at least another Bluetooth device such as the WA200 series
room controller.
Adding the WOS3-PC to a networked system
Using the cloud-based software, initiate the Discovery process prior to energizing the WOS3-PC sensor, so as soon
the power is applied, the sensor will enter the network joining mode. The sensor will repeat the process every 30 minutes,
so if the device was energized prior to initiating the Discovery process, then it will join the network with at least 30 minutes
delay. To expedite the process can perform a Factory Reset which initiates the network joining mode.
“
“
“
“
WA200 series.
WOS3-PC sensor, so as soon
Adding the WOS3-PC to a “Room” using the App
(Optional) Masking Installation
