background image

Tetra

®

 miniMAX 

Installation Guide

4

Electrical Connections

NOTE: Do not use connectors pre-filled with silicone grease/mineral base protective grease or use silicone grease to seal connections.

Red stripe (+)

White (-)

Connect LED strips using in-line (IDC) connectors or 

twist-on wire connectors.
NOTE: Seal all connections in wet locations with 

electrical grade RTV silicone.

Cap wires

Optional: Cut wires flush

Must cap all exposed wires with appropriate wire 

connectors and seal with electrical grade RTV silicone. 

Optional: Cut wires flush to the module and seal with 

electrical grade RTV silicone.

Seal all connections in wet locations 

with electrical grade RTV silicone

1

2

Connect the red stripe wire (+) of the LED strip to the 

red wire (+) of the power supply.  Connect the white 

wire (-) of the LED strip to the black or blue wire (-) of 

the LED power supply.
NOTE:  All electrical connections should be suitably 

protected from mechanical damage and the 

environment. Seal all connections in wet locations 

with electrical grade RTV silicone.

Run a wire from the LED power supply to the LED 

module and connect. 
NOTE: Must be used with Class 2 24 Volt Power 

Supplies.
NOTE:
 Refer to Maximum Loading & Remote 

Mounting Specifications on page 4.

LED 

Power 

Supply

To Tetra LED System

Red (+)

Black or blue (-)

To LED 

power 

supply 

Red (+)

Black or 

blue (-)

Red Stripe (+)

White (-)

Seal all connections in wet locations 

with electrical grade RTV silicone

OPTIONAL 

A Weather Box (GEXNWB2) may be used to 

house and seal Class 2 connections. 
A) Insert wire connectors into weather box. Fill 

with electrical grade silicone and close box. 
B) Secure the weather box using a #6 or #8 

(M2 or M3) screw.

Weather box 

can be painted

3

4

A

B

Light engine

Reviews: