A
B
C
D
Sun Stand
™
2
HEAVY DUTY H.I.D. AND FLUORESCENT LIGHT STAND
ASSEMBLY INSTRUCTIONS
This unit contains:
Parts to Assemble Sun Stand
™
2
Parts to hang column
Qty Description
Qty Description
1 ea Top bar (A)
2 ea Grow Yo-Yo’s
2 ea Side upright bars (B)
2 ea Hanging shuttles
2 ea Feet (C)
36 ea ¼-20 x
3
⁄
8
” screws
4 ea Foot support gussets (D)
You will need a #3 Phillips screwdriver to assemble this Sun Stand™ 2.
Step 1. Place foot over top of outer leg and slide towards bottom.
Step 2. Place a foot support gusset with flat surface out in corner of leg and attach each gusset with
four screws. Then attach the foot to the outer leg with two screws.
Step 3. Repeat step 2 for other side.
STEP 1
STEP 2
A
DETAIL A
STEP 3
Repeat step 2 for
the other side.
