![background image](http://html1.mh-extra.com/html/daintree/ge-forum-frame-ind739/ge-forum-frame-ind739_installation-manual_3251047002.webp)
2
Forum | Frame Series |
Surface Mounting
Installation Guide
Installation
Mount remote driver box to structure with in 50’ from fixture. Run
wires from driver box to fixture.
1
2
Align fixture housing flush to ceiling or wall depending what has been
specified and secure through factory-drilled holes using screws (not
provided) appropriate for surface type.
Turn off the power to the fixture’s circuit. 7/8” power feed hole is
provided for wiring to be fed into fixture.
Connect geartray to fixture housing via provided electrical junction and
re-insert geartray and lens back into housing.
3
4
COMPONENTS FOR SURFACE MOUNTING
The Frame series surface mounting system consists of four main
components: the housing (A), the geartray (B), the lens (C), the remote
drive box (D). These items come shipped with and attached to the
fixture to help ensure proper counts and clarification during assembly.
In preparation for installation, remove geartray (B) and lens (C) from
housing (A) and set aside in a safe area.
A
B
C
D