6
Note:
For 1000/650lm luminaires, the default lumen output is 1000lm. Push the switch up to activate the 650lm setting.
For 4000/3000lm luminaires, the default lumen output is 4000lm. Push the switch up to activate teh 3000lm setting.
Adjusting Lumen Output
(for compatible fixtures only)
LRX Series Mounting
Connect conduit end with input leads to existing
junction box and make proper connections. Connect
the black, white and green/yellow wire of the input
leads to the black, white and green wires using twist-on
wire connectors and close junction box.
Optional dimmer: When connecting a dimming
controller, wires must be run through another separate
knockout hole. Connect the violet (d) and
gray (dimming - ) wires to the violet and gray wires of
the fixture.
Note: Cap unused dimming leads with wire nuts
For dimming device compatibility for 0-10V and phase
cut dimming, please refer to:
www.gecurrent.com/dimming
18
19
Lumination
®
RC/LRC/RXLRX Series
Installation Guide