Lumination
®
RC/LRC/RXLRX Series
Installation Guide
2
Provided Components
The components have been properly packed to avoid damage during transit. Inspect the components to confirm there is no physical
damage. Do not install damaged components.
Option A: If no holes are present on short side, use #8-1/2” self-drilling
screws
Option B: If holes are present on the short side, use the screws provided
with the frame.
Frame Installation
Cut the appropriate size
hole into the ceiling tile.
Ensure frame hole diameter
matches fixture diameter.
Option A: Mount fixture by attaching hanger bars to T-Grid
ceiling (BH3 SKU 94890)
Option B: Mount fixture with 1.2” EMT conduit (not supplied)
Adjust fixture height to be flush with ceiling and tighten both
mounting bracket wing nuts.
Place side L-brackets on existing frame
screws and tighten with screwdriver on
both sides of the frame. Then attach
mounting brackets to both L-brackets with
provided wing nuts.
Slide hanger bars
through adjustable
mounting brackets.
Fixture
Diameter
Ceiling Hole
Diameter
LRXR4
4.9-5.2in
RC6/LRC6
6.4-7.2in
RX6/
LRXR6/
LRXGR6
5.91-6.60in
RC8/LRC8
7.5-8.9in
RX8/LRXR8
7.68-8.27in
LRXR10
10.2-11.0in
LRXR12
12.2-13.0in
1
4
5
2
3
