DAINESE D-AIR SKI EVOLUTION, Operation Manual

Page: 20 / 186

39
D - A I R ® S K I E V O L U T I O N
38
I N F O R M A T I V E N O T E F O R I N F L A T A B L E P R O T E C T O R S
3.4. GUIDE TO USER INTERFACE LED SEQUENCE
DURING USE
The user interface is composed of a three color LED positioned on the back protector in proximity of the on/off switch of the
D-AIR SKI EVOLUTION (see diagram in Figure 5). The three colors are: red, green and blue.
After the device is switched on using the on/
off switch, the interface will show the charge
level remaining in the System’s battery through a
sequence of 5 green or red and flashings repeated
twice. Five green flashings indicate a full charge;
every red flash indicates a loss of roughly 20% in
charge. Each flashing lasts around 0.2 seconds, each
flashing sequence is separated from the next by a
pause of around 2 seconds.
After the battery’s charge level has been indicated,
the status of the system will be indicated through
another sequence of six flashings. A blue flashing
followed by green flashings indicates that the signal
is operating correctly and that it is now awaiting the
GPS signal. This might happen inside a building, for
example, or where the GPS signal is not available.
1 2
FIGURE 5: EXAMPLE OF FLASHING SEQUENCE
INDICATING BATTERY CHARGE LEVEL
FIGURE 6: EXAMPLE OF FLASHING SEQUENCE
INDICATING WAITING PERIOD FOR GPS SIGNAL,
FIRST BLUE FLASHING
100
%
CHARGE
CHARGE
CHARGE
80
%
60
%