![background image](http://html.mh-extra.com/html/daikin/vrv-iii/vrv-iii_service-manual_502207121.webp)
Field Settings
SiUS34-801A_b
106
VRVIII R-410A Heat Pump 60Hz
Setting item 0 Display contents of “Number of units for various settings”
12.1.4 Setting of Low Noise Operation and Demand Operation
Setting of Low Noise Operation
By connecting the external contact input to the low noise input of the outdoor unit external control
adaptor (optional), you can lower operating noise.
A. When the low noise operation is carried out by external instructions (with the use of
the external control adaptor for outdoor unit)
1. Connect the external adaptor for the outdoor unit, and then connect the external input wiring to
EMG operation /
backup operation
setting
ON
9 7 7 8 7 7 7
OFF
9 7 7 7 7 7 7
Defrost select setting
Short
9 7 7 7 8 7 7
Medium
9 7 7 7 9 7 7
Long
9 7 7 7 7 7 7
Te setting
L
9 7 7 7 7 7 7
M
9 7 7 7 7 9 7
H
N
~
R
9 7 7 7 7 8 7
Tc setting
L
9 7 7 7 7 7 7
M
9 7 7 7 7 7 9
H
9 7 7 7 7 7 8
Data such as addresses and number of units is expressed as binary numbers; the two
ways of expressing are as follows:
The No. 1 cool/heat unified address is expressed as a binary
number consisting of the lower 6 digits. (0 - 63)
In the address is 010110 (binary number), which translates to
16 + 4 + 2 = 22 (base 10 number). In other words, the address is
22.
The number of terminal blocks for No. 12 and 13 is expressed as
an 8-digit binary number, which is the combination of four upper,
and four lower digits for No. 12 and 13 respectively. (0 - 128)
In the address for No. 12 is 0101, the address for No. 13 is
0110, and the combination of the two is 01010110 (binary
number), which translates to 64 + 16 + 4 + 2 = 86 (base 10
number). In other words, the number of terminal block is 86.
See the preceding page for a list of data, etc. for No. 0 - 25.
9 797997
16 4 1
32 8 2
977 7979
64 16
128 32
No.12
977 7997
4 1
No.13
8
2
Setting
Content
Level 1
Set the outdoor unit fan to Step 5 or lower.
Level 2
Set the outdoor unit fan to Step 4 or lower.
Level 3
Set the outdoor unit fan to Step 3 or lower.
Summary of Contents for VRV III
