background image

English

9

6-6 PRECAUTIONS FOR GROUP CON-

TROL SYSTEM OR TWO REMOTE CON-
TROLLER CONTROL SYSTEM

This system provides two other control systems 
beside individual control (one remote controller con-
trols one indoor unit) system. Confirm about your sys-
tem to Daikin dealer.

Group control system

One remote controller controls up to 16 indoor 
units. All indoor units are equally set.

Two remote controller control system

Two remote controllers control one indoor unit (in 
case of group control system, one group of indoor 
units). The unit is individually operated.

NOTE

• Contact your Daikin dealer in case of chang-

ing the combination or setting of group con-
trol and two remote controller control 
systems.

7. OPTIMUM OPERATION

Observe the following precautions to ensure the 
system operates properly.

• Prevent direct sunlight from entering a room dur-

ing cooling operation by using curtains or blinds.

• Do not keep doors and windows opened. If the 

doors and windows remain open, air will flow out 
of your room causing a decrease in the cooling or 
heating effect.

• Do not use other heating devices directly beneath 

the indoor unit.
If you do, they might get deformed by the heat.

• Never place objects near the air inlet or the air 

outlet of the unit. It may cause deterioration in the 
effect or stop the operation.

• Adjust the room temperature properly for a com-

fortable environment. Avoid excessive heating or 
cooling.

• Ventilate often.

Extended use requires special attention to venti-
lation.

• When the display shows “

” (time to clean the 

air filter), ask a qualified service person to clean 
the filters. (Refer to the chapter “Maintenance” in 
the indoor unit manual.)

• Keep the indoor unit and remote control at least 

1 m away from televisions, radios, stereos, and 
other similar equipment.
Failing to do so may cause static or distorted pic-
tures.

• Turn off the main power supply switch to the unit 

when the unit is not used for longer periods of 
time. If the switch is on, it uses electricity. Before 
restarting the unit, turn on the main power supply 
switch 6 hours before operation to ensure smooth 
running. (Refer to the chapter “Maintenance” in 
the indoor unit manual.)

• Fully use the function of air flow direction adjust.

Cold air gathers on the floor, and warm air gathers 
in the ceiling.
Set the air flow direction parallel during cooling or 
dry operation, and set it downwards during heat-
ing operation.
Do not let the air blow directly to a person.

• It takes time for the room temperature to reach the 

set temperature.
We recommend starting the operation in advance 
using timer operation.

8. SEASONAL MAINTENANCE

CAUTION

• Do not touch the air inlets or aluminum fins 

of the outdoor or indoor units.

Touching them may result in injury.

• Do not wash the outdoor or indoor units with water.

An electric shock or fire may result.

• Watch your steps at the time of air filter cleaning etc.

If the scaffold is unstable, you may fall or topple 
down, thus causing injury.

• Be sure to stop the operation, and turn the 

breaker off before cleaning.

This may cause electric shock and injury.

• Consult with the dealer for cleaning the interior 

of the indoor units.

Incorrect cleaning may damage the plastic parts 
and cause failures, such as water leakage, and an 
electric shock may result.

8-1 AT THE BEGINNING OF THE SEASON

Check

• Are the indoor and outdoor unit intake and outlet 

vents blocked?
Remove anything that might be blocking them.

Clean the exterior.

• See the operation manual included with the 

indoor unit for details on how to clean it.

Turn the power on.

• When the power comes on, the characters in the 

remote controller display appear.
(To protect the unit, turn the power on at least 6 
hours before operating it. This makes operation 
smoother.)

01_EN_3P201178-2B.fm  Page 9  Wednesday, April 25, 2007  3:51 PM

Summary of Contents for VRV III REYQ8PY1B




















Reviews: