2
English
NOTE
•
Do not remove the air filter except when cleaning. Unneces
-
sary handling may damage the filter.
(This product is not provided with an air filter as a standard
accessory.)
•
Do not attach objects other than the genuine air filter (e.g.,
kitchen paper) to the suction.
Otherwise, the performance of the air conditioner will be
degraded, and icing or water leakage may result.
•
Request a special contractor for the cleaning of the air filter.
•
Be sure to use the optional filter chamber.
Request your dealer for the installation of the filter chamber.
•
Be sure to clean the air filter at the beginning of the cooling
or heating season.
(A decrease in the airflow volume of the air conditioner will
result and the performance of the air conditioner will be
degraded if the air filter is clogged with dust or dirt.)
After completing cleaning and installing the air filter, turn
off the indicating the filter sign on the remote controller.
•
The indication can be turned off whether in operation or at
stop.
•
For details, refer to the operation manual attached to the
remote controller.
HOW TO CLEAN DISCHARGE, OUTSIDE PANELS
AND REMOTE CONTROLLER
1. Clean with soft cloth.
2.
When it is difficult to remove stains, use water or neutral
detergent.
NOTE
•
Do not wash the suction grille with water of 122°F
(50°C) or higher.
It may cause discoloration and deformation.
•
When drying the suction grille, do not heat it with fire. It
may cause burning.
•
Do not use substances such as gasoline, benzine,
thinner, polishing powder and liquid insecticide sold in
the market.
It may cause discoloration and deformation.
WHAT TO DO WHEN START UP AFTER A LONG
PERIOD OF NO USE
Confirm the following
•
Check that the suction and discharge of indoor and outdoor
units are not blocked.
Remove any obstacle.
Obstacles decrease the fan speed, and cause performance
decrease and may damage the unit.
Clean the air filter
•
After cleaning the air filter, make sure to reinstall it.
(Refer to “
2. MAINTENANCE
” on page 1.)
•
For information on how to install, remove, or clean the
optional air filter, refer to the user’s manual attached to the
air filter.
•
Turn off the indicating the filter sign displayed on the remote
controller after turning on the power.
The indication can be turned off whether in operation or at
stop.
•
For details, refer to the operation manual attached to the
remote controller.
Turn on the power circuit breaker at least 6 hours before
operation.
•
This is required in order to activate the air conditioner
smoothly, and to protect air conditioner.
•
The display on the remote controller will be shown when
the power circuit breaker is turned on.
01_EN_3P494229-3E.indd 2
2022/06/29 16:33:15
