IM 1119-1
6
www.DaikinApplied.com
8 .
Remove screws and/or panels that will allow access to
the inside of the unit control box, or locate the remote
thermostat terminal strip/block, to connect the RCN to the
unit control board.
9 .
Connect the stripped wire leads from the RCN assembly
to the appropriate terminals on the unit control board or
remote thermostat terminal strip/block.
Figure 6: RCN wire connections to the MicroTech III unit
controller terminal plug
Figure 7: Connect wire leads from RCN to the appropriate
terminals on the unit control board
Terminal connections on unit control board or remote
thermostat strip/block
10 .
After making all wire connections, plug the RCN terminal
block back onto the RCN board, opposite of removal, in
step 5.
Figure 8: Plug the RCN terminal block back onto RCN board
