![background image](http://html2.mh-extra.com/html/daikin/swp-series/swp-series_installation-manual_5691801049.webp)
C
heCk
, T
esT
,
and
s
TarT
P
roCedure
f
orm
Equipment Warranty Registration Form
Complete this form and return to Daikin Applied, Warranty Department, within 10 days to comply with the terms of Daikin Applied Warranty.
Check, Test, and Start Procedure for SWP/SWT (Self-Contained Air Conditioning Systems)
Job name: _____________________________________________________________ Daikin Applied G.O. #: ___________________
Installation address: _____________________________________________________________________________________________
City: __________________________________________________________________ State: __________________________________
Purchasing contractor: ___________________________________________________________________________________________
City: __________________________________________________________________ State: __________________________________
Unit model number: _____________________________________________________ Serial number: __________________________
Compressor #1 serial number: _____________________________ Compressor #2 serial number: _____________________________
Compressor #3 serial number: _____________________________ Compressor #4 serial number: _____________________________
Compressor #5 serial number: _____________________________ Compressor #6 serial number: _____________________________
Compressor #7 serial number: _____________________________ Compressor #8 serial number: _____________________________
Mark NA on all items that do not apply to the type of the unit. See the IM bulletin for more information. Make any additional
comments on a separate sheet of paper and attach to this form.
I. Initial Check
A. Is any shipping damage visible? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
B. Is the unit installed level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
C. Is the unit positioned to provide adequate free area for service and operation? . . . . . . . . . . . . Yes
No
N/A
D. Are the fan drives properly aligned and belts adjusted . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
E. Does the fan turn freely? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
F. Are all setscrews on pulleys, bearings, and fans tightened?. . . . . . . . . . . . . . . . . . . . Yes
No
N/A
G. Is the entering condenser water temperature sensor located correctly? . . . . . . . . . . . . . . . Yes
No
N/A
H. Has the installing contractor installed the return air temperature sensor in the return air stream? . . . . . Yes
No
N/A
I. Has the installing contractor installed the high and low static pressure sensor tubing in the ductwork? . . . Yes
No
N/A
J. Does electrical service correspond to the unit nameplate? . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
K. Are adequate disconnect and circuit protectors installed? . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
L. Is the unit adequately grounded? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
M. Are all electrical power connections tight? . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
N. Have the compressor heaters operated continuously for 24 hours prior to startup? . . . . . . . . . . Yes
No
N/A
O. Does all electrical wiring conform to unit electrical diagram? . . . . . . . . . . . . . . . . . . . Yes
No
N/A
P.
Does all field wiring conform to electrical diagrams?
. . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
Q. Are all service valves open? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
R. Have all shipping hold-down plates securing the fan frame been removed? . . . . . . . . . . . . . Yes
No
N/A
S.
On unit with ducted return, has the low side tubing for PC5 (dirty filter switch) been installed?
. . . . . . Yes
No
N/A
T.
Are all the cleanout plugs installed (condenser, condensate trap, and optional waterside economizer)?
. . Yes
No
N/A
U.
Is the water flow sensor (WFS) installed?
. . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
II. Start-Up
A. Does the unit start and perform per sequence of operation as stated in the IM bulletin? . . . . . . . . . Yes
No
N/A
B. Does the fan rotate in the right direction? . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
C. Condenser inlet water temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
D. Condenser outlet water temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
E. Number of compressors operating . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
F. Return air temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
G. Mixed air temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
H. Supply air temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
I. Compressor readings: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . _________ °F
C
heCk
, T
esT
,
and
s
TarT
P
roCedure
f
orm
www .DaikinApplied .com 49
IM 1032-2 • Self-Contained Air Conditioning Systems