SiUS28-902_B
Field Setting
Test Operation
59
Mode changing procedure
Mode changing procedure
Setting mode 1
Monitor mode
H1P
Blinking
MODE
MODE
OFF
H1P
Setting mode 2
MODE
ON
H1P
Press and hold the BS1
(MODE) for 5 seconds.
Press the BS1(MODE) 1 time.
(Normal)
Press the BS1(MODE)
1 time.
Using the MODE button, the modes can be changed as follows.
Check item selection (Set)
Contents display
Monitor mode
Press BS3 (RETURN) 1 time.
Press BS3 (RETURN) 1 time.
Setting item selection (Set)
Setting mode 2
(Set): Select mode with BS2 (SET) in each selection step.
Press BS3 (RETURN) 1 time.
Press BS3 (RETURN) 1 time.
Press BS3 (RETURN) 1 time.
Press BS1 (MODE) 1 time.
Press BS1 (MODE) 1 time.
Press BS1(MODE) 1 time.
Press BS1 (MODE) for more than 5 sec.
Setting mode 1
(Initial condition)
Setting condition
selection (Set)
Setting condition
(Contents) display
