SiBE281013
Wired Remote Controller
Remote Controller
17
1.4.2 BRC1E51A7
In order to conduct the centralized remote control using the centralized remote controller and
the unified ON/OFF controller, Group No. settings should be made by group using the operating
remote controller.
Make Group No. settings for centralized remote control using the operating remote controller.
NOTICE
Enter the group No. and installation place of the indoor unit into the attached installation table.
Be sure to keep the installation table with the operation manual for maintenance.
(1) <Basic screen>
Press and hold Cancel button for 4 seconds or more.
Field setting menu is displayed.
(2) <Field setting menu screen>
Select
in the field setting menu, and
press Menu/Enter button.
Group No. setting screen is displayed.
(3) <Group No. setting>
Select Group No. setting (Group), and press Menu/Enter
button.
Group No. setting (Group) screen is displayed.
(4) <Group No. setting (Group)>
Select the group No. by using
ST
(Up/Down) button.
Press Menu/Enter button.
Group No. setting
