background image

English 

8

MAINTENANCE

8. 

(FOR SERVICE PERSONNEL)

 WARNING

Only a qualifi ed person is allowed to perform 

• 

maintenance without daily maintenance.

Before touching any of connection wirings, 

• 

be sure to turn off all power supply switches.

For installation of optional parts, only a quali-

• 

fi ed person is allowed to do so.

Be sure to use optional parts specifi ed by our 
company.  Installation in your own manner may 
result in water leakage, electric shock or fi re.

 CAUTION

Be sure to stop operation and turn the power 

• 

switch off before cleaning the air conditioner.

Otherwise, an electric shock or injury may result.

Do not wash the air conditioner with water.

• 

Doing so may result in an electric shock.

Consult with installation contractor for clean-

• 

ing the inside of the air conditioner.

Wrong cleaning may make the plastics parts 
broken or cause failure of water leakage or elec-
tric shock.

Use a stable stool.

• 

Use extra cautions when cleaning the air condi-
tioner.

Maintenance and inspection

Clean the drain pan periodically.  The drain pipes 

• 

clogged with dust will cause water leakage.
For cleaning, consult with your Daikin dealer.

• 

(Before each season when cooling or heating is 
required, clean the air conditioner.)
If the area around the indoor unit is very dusty, 

• 

use a dust-proof cover (local procurement).

Cleaning the inside of the indoor unit

It is necessary to clean the inside of the indoor 

• 

unit periodically.
Since the cleaning requires special technologies, 
request a Daikin dealer to clean them.

Daily maintenance:

Cleaning the air fi lter

The air fi lter is an optional accessory.

• 

Explanation

Removing the air fi lter except when cleaning the 

• 

air conditioner may result in accidents.

When the 

• 

 mark is displayed on the remote 

controller, please clean the fi lter.
When the operating time exceeds the designat-

• 

ed time, this mark will be displayed.
If using the air conditioner under very dusty 

• 

environment, increase the frequency of air fi lter 
cleaning.
When you want to change the setting time until 

• 

the 

 mark is displayed, consult with your 

dealer.
(The default factory setting is 2500 hours.)
There are the following time, display pattern.

• 

           1250, 2500, 5000, 10000

HOW TO CLEAN THE AIR FILTER

Remove the air fi lter.

1. 

Filter

Clean the air fi lter.

2. 

Use a vacuum cleaner 

A)

 or wash the air fi lter 

with water 

B)

.

A)

  Using a vacuum cleaner

B)

  Washing with water

When the air fi lter is very dirty, use 
soft brush and neutral detergent

Remove water and dry in the 
shade.

 NOTE

Do not wash it with hot water of more than 120°F. 

• 

Doing so may result in discoloration and/or de-
formation.
Do not expose it to fi re. Doing so may result in 

 

burning.

01_EN_3P250362-3A.indd   8

01_EN_3P250362-3A.indd   8

3/16/2010   4:24:08 PM

3/16/2010   4:24:08 PM

Summary of Contents for SkyAir FTQ18PAVJU















Reviews: