background image

4

CONTENTS

ILLUSTRATIONS .................................................. 3

1. WHAT TO DO BEFORE OPERATION ........... 4
2. SAFETY CONSIDERATIONS......................... 4
3. OPERATION RANGE ..................................... 7
4. INSTALLATION SITE...................................... 7
5. NAME AND FUNCTION OF EACH SWITCH

AND  DISPLAY ON THE REMOTE 
CONTROLLER ............................................... 8

6. OPERATION PROCEDURE........................... 8
7. OPTIMUM OPERATION ................................11
8. MAINTENANCE

(FOR SERVICE PERSONNEL).....................11

9. NOT MALFUNCTION OF THE 

AIR CONDITIONER...................................... 13

10. TROUBLE SHOOTING................................. 14

This operation manual is for the following system 
with standard control. Before initiating operation, 
contact your dealer for the operation that corre-
sponds to your system.

NOTE

If the unit you purchased is controlled by a wire-
less remote controller, also refer to the wireless 
remote controller’s operation manual.

If your installation has a customized control system, 
ask your dealer for the operation that corresponds to 
your system.

TWO REMOTE CONTROLLERS CONTROL 
SYSTEM

Confirm the following if your unit is the following con-
trol system type.

• Two remote controllers control system

Two remote controllers control one indoor unit.
The unit is individually operated.

NOTE

Contact your dealer in case of two remote 
controllers control system.

 Refer to figure 2 on page 3 

Please read these “SAFETY CONSIDERATIONS” 

carefully before installing air conditioning equipment 

and be sure to install it correctly. After completing 

the installation, make sure that the unit operates 

properly during the start-up operation.

Please instruct the customer on how to operate the 

unit and keep it maintained.

Also, inform customers that they should store this 

operation manual along with the installation manual 

for future reference.

This air conditioner comes under the term “appli-

ances not accessible to the general public”.
Meaning of danger, warning, caution and note sym-

bols.

DANGER

.....Indicates an imminently hazard-

ous situation which, if not avoided, 

will result in death or serious 

injury.

1. WHAT TO DO BEFORE 

OPERATION

Outdoor unit

Unit with
remote
controller

Names and functions of parts

a

Indoor unit

b

Outdoor unit 

c

Remote controller

d

Inlet air

e

Discharge air

f

Air outlet

g

Air flow flap (at air outlet)

h

Refrigerant pipe, connection electric wire

i

Drain pipe

j

Air inlet
The built-in air filter removes dust and dirt.

k

Drain pumping out device (built-in)
Condensate removed from the room during 
cooling.

l

Ground wire
Wire to ground from the outdoor unit to pre-
vent electrical shocks.

2. SAFETY CONSIDERATIONS

01_EN_3PN05140-8W.fm  Page 4  Wednesday, September 14, 2005  2:06 PM

Summary of Contents for SkyAir FCQ36MVJU

















Reviews: