![background image](http://html1.mh-extra.com/html/daikin/siesta-atxm20n2v1b/siesta-atxm20n2v1b_user-reference-manual_2460060044.webp)
8
|
Troubleshooting
User reference guide
44
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
Malfunction
Measure
Operation does NOT start
soon.
In case the ON/OFF button was pressed right after
operation was stopped or if the mode was changed.
Operation will start after 3 minutes to protect the
system.
The system operates, but
cooling or heating is
insufficient.
▪
Check the airflow rate setting. Refer to
▪
Check the temperature setting. Refer to
start/stop operation mode and to set the
temperature"
19].
▪
Check if the airflow direction setting is
appropriate. Refer to
20].
▪
Check if the air inlet or outlet of the outdoor or
indoor unit is NOT blocked by obstacles. Remove
any obstacles and make sure the air can flow
freely.
▪
Check if the air filters are clogged. Clean the air
filters. See
37].
▪
Check for open doors or windows. Close doors and
windows to prevent wind from coming in.
▪
Check if the unit operates in Econo or Outdoor
unit quiet operation. Refer to
▪
Check if there is any furniture directly under or
next to the indoor unit. Move the furniture.
The system operates, but
heating is insufficient (air is
NOT blown from the unit).
▪
The air conditioner may be warming up for heating
operation. Wait for 1 to 4 minutes.
▪
If a flowing sound is heard, the outdoor unit may
be in defrost operation. Wait for 4 to 12 minutes.
The ON/OFF timer does
NOT operate according to
the settings.
▪
Check if the Weekly timer and ON/OFF timer are
set to the same time. Change or deactivate the
setting.
Refer
to
25] and
▪
Check if the clock and the day of the week are set
correctly. Refer to
Cooling operation CANNOT
be selected.
Check if your system is NOT heating only version.
An abnormal function
happens during operation.
The air conditioner may malfunction because of
lightning or radio waves. Turn the breaker OFF and
back ON.
The unit does NOT receive
signals from the user
interface.
▪
Check the batteries of the user interface. Refer to
14].
▪
Make sure that the transmitter is NOT exposed to
direct sunlight.
▪
Check if there are any electronic starter type
fluorescent lamps in the room. Contact your
dealer.
Summary of Contents for Siesta ATXM20N2V1B
Page 53: ......
Page 54: ......
Page 55: ......
Page 56: ...4P518786 2F 2020 05 Copyright 2018 Daikin Verantwortung f r Energie und Umwelt...