Daikin Siesta ATXM20N2V1B, User Reference Manual

Page: 32 / 56

5 | Operation
User reference guide
32
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
5.12.3 Wireless adapter components
a
b
c
d
e
a RUN lamp (orange)
b AP lamp (yellow)
c SETUP button
d MODE button
e POWER button
Purpose
RUN Lights when connecting to a router (Wireless LAN access point).
AP Lights when connected directly to a smartphone.
SETUP Use when connecting to a router (Wireless LAN access point).
MODE Switches modes (RUN/AP) when held down.
POWER Turns the WLAN adapter ON or OFF when pressed.
5.13 About Multi system
In Multi system, 1 outdoor unit is connected to multiple indoor units.
A B
C D
5.13.1 Priority room setting
Priority room setting requires initial programming during installation. Please
consult your authorized dealer for assistance.
When priority room setting is inactive or not present
When more than 1 indoor unit is operating, priority is given to the first unit that
was turned on. Set other units to the same operation mode. Otherwise, they will
enter the standby mode, and the operation lamp will flash (does NOT indicate
malfunction).
Exceptions: If the first unit that was turned on is set to fan only , and then in the
other room heating mode is set, priority will be given to the unit set to the heating
mode. The first unit will go in standby and the operation lamp will flash.