SiENBE07-618_C
Operation Manual
System Configuration
51
What’s the HOME LEAVE operation
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air
flow rate which you use the most? HOME LEAVE operation is a function that allows you to
record your favorite set temperature and air flow rate. You can start your favorite operation
mode simply by pressing the HOME LEAVE button on the remote control. This function is
convenient in the following situations.
Useful in these cases
1. Use as an energy-saving mode
Set the temperature 2-3°C higher (cooling) or lower (heating) than normal. Setting the fan
strength to the lowest setting allows the unit to be used in energy-saving mode. Also
convenient for use while you are out or sleeping.
•
Every day before you leave the house...
•
Before bed...
2. Use as a favorite mode
Once you record the temperature and air flow rate settings you most often use, you can
retrieve them by pressing HOME LEAVE button. You do not have to go through troublesome
remote control operations.
NOTE
When you go out, push the
“HOME LEAVE Operation”
button, and the air conditioner
will adjust capacity to reach the
preset temperature for HOME
LEAVE Operation.
When you return, you will be
welcomed by a comfortably air
conditioned room.
Push the “HOME LEAVE
Operation” button again, and
the air conditioner will adjust
capacity to the set temperature
for normal operation.
Set the unit to HOME LEAVE
Operation before leaving the
living room when going to
bed.
The unit will maintain the
temperature in the room at a
comfortable level while you
sleep.
When you enter the living room
in the morning, the temperature
will be just right.
Disengaging HOME LEAVE
Operation will return the
temperature to that set for
normal operation. Even the
coldest winters will pose no
problem!
•
Once the temperature and air flow rate for HOME LEAVE operation are set, those settings will be used
whenever HOME LEAVE operation is used in the future. To change these settings, please refer to the “Before
using HOME LEAVE operation” section above.
•
HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in AUTO, DRY, and FAN
mode.
•
HOME LEAVE operation runs in accordance with the previous operation mode (COOL or HEAT) before using
HOME LEAVE operation.
•
HOME LEAVE operation and POWERFUL operation cannot be used at the same time.
Last button that was pressed has priority.
•
The operation mode cannot be changed while HOME LEAVE operation is being used.
•
When operation is shut off during HOME LEAVE operation, using the remote control or the indoor unit ON/OFF
switch,“
” will remain on the remote control display.
SIENBE07-618_C_FRONT.pdf 63
9/02/2011 9:25:06
