6
Installation Site
Regarding places for installation
•
Install the air conditioner in a well-ventilated
place that is free of obstructions.
•
Do not use the air conditioner in the
following kinds of places:
a. Where there is considerable use of mineral oil
such as cutting oil.
b. Where there is much salt such as a beach
area.
c. Where there is sulphur gas such as in a
hot-spring resort.
d. Where there are considerable voltage
fluctuations such as a factory.
e. Where there are motor vehicles or marine
vessels.
f. Where there is considerable atmospheric oil
such as in cooking areas.
g. Where there are machines generating
electromagnetic radiation.
h. Where the air contains acidic or alkaline
steam or a vapour.
•
Protection against snow
For details, consult your dealer.
Wiring
•
All wiring must be performed by an
authorized electrician.
Always consult your dealer about wiring.
Never do it by yourself.
•
Only use the dedicated power supply circuit
provided for this air conditioner.
Also pay attention to operating noise.
•
Select the following kinds of location:
a. A place that can sufficiently withstand the
weight of the air conditioner with less running
noises and vibrations.
b. A place where warm airflow from the air outlet
of the outdoor unit and operating noise do not
cause a nuisance to neighbours.
•
Be sure there are no obstructions near the
air outlet of the outdoor unit.
•
Obstructions may result in poor
performance and increased operating noise.
If abnormal noise occur, ask your dealer for
advise.
System relocation
•
Consult your Daikin about remodelling and
relocation.
2.
Introduction
2.1
System layout
4
3
2
1
1
Outdoor unit
2
Refrigerant piping
3
Indoor unit
4
Remote controller
3.
Before operation
This operation manual is for the following systems
with standard control. Before initiating operation,
contact your dealer for the operation that
corresponds to your system type and mark.
If your installation has a customized control
system, ask your dealer for the operation that
corresponds to your system.
Operation modes:
“
, ” Heating and Cooling (air to air).
“
” Fan only operation (air to air).
“
” Dry operation.
“
” Automatic operation.
Dedicated functions exist depending on the type of
indoor unit, refer to dedicated installation/operation
manual for more information.
4.
Remote controller
This operation manual will give a non-exhaustive
overview of the main functions of the system.
Detailed information on required actions to achieve
certain functions can be found in the dedicated
installation and operation manual of the indoor unit.
Refer to the operation manual of remote controller.
01_EN_3P529409-2B.indd 6
15-Nov-19 3:02:27 PM
