12
How to set Master Remote Controller
•
When the right to select the cooling/heating operation mode is set in the master remote controller, “
” is dis-
played in slave remote controllers.
The right to select the cooling/heating operation mode cannot be set in slave remote controllers.
TEST
C
H
1·2·3
For the BRC1C61
1·2·3
For the BRC1A61
*The situation is the same for the BRC1A62.
•
When the system is installed as shown below, it is necessary to designate the master remote controller.
•
Only the remote controller having the right to select the cooling/heating operation mode (master remote controller)
can select the cooling/heating operation mode.
•
The displays of slave remote controllers show “
” (CHANGEOVER UNDER CONTROL) and they automati-
cally follow the operation mode directed by the master remote controller. (This symbol is not displayed in wireless
remote controllers.)
However, it is possible to changeover to PROGRAM DRY with slave remote controller only if the system is in COOLING
OPERATION set by the master remote controller.
When one outdoor unit
is connected with
several indoor units.
Setting the master remote controller
02_EN_3PN07192-6E.fm Page 12 Monday, January 17, 2011 1:52 PM
Summary of Contents for RXYMQ4PVET
Page 20: ...3PN07192 6E EM10A049 1104 HT ...
