background image

Names of parts

This operation manual is for the following systems with standard control. If your installation has a customized control 

system, ask your Daikin dealer for the operation that corresponds your system.

BEFORE INSTALLATION, CONTACT YOUR DAIKIN DEALER TO CONFIRM YOUR SYSTEM TYPE.

ATTENTION

To protect the unit, turn on the main power switch 6 hours before operation.

Installation site

The system provides 4 operation modes,

Cool/Heat changover

 

 

remote controller

Operation modes

Inverter series

heat pumps 

RXYMQ

 series

 yes     no

 (COOLING), 

 (HEATING),  

 (DRY) and  

 (FAN).

System

Cool/Heat changeover 

remote controller (only for 3, 4, 5, 6 hp)

Also pay attention to operating noise.

    Select the following kinds of location:

         a. A place that can sufficiently withstand the weight of the 

             air conditioner with less running noises and vibrations.

         b. A place where warm airflow from the air outlet of the outdoor 

             unit and operating noise do not cause a nuisance to neighbours.

    

Be sure there are no obstructions near the air outlet of the outdoor unit.

    

Obstructions may result in poor performance and increased operating noise.

    If abnormal noise occur, ask your dealer for advise.

Regarding wiring

    All wiring must be performed by an authorized electrician.

    Always consult your dealer about wiring. Never do it by yourself. 

    

Only use the dedicated power supply circuit provided for this air conditioner.

    

Install the air conditioner in a well-ventilated place that is free of obstructions

    

Do not use the air conditioner in the following kinds of places:

         a. Where there is considerable use of mineral oil such as cutting oil

         b. Where there is much salt such as a beach area

         c. Where there is sulphur gas such as in a hot-spring resort

         d. Where there are considerable voltage fluctuations such as a factory

         e. Where there are motor vehicles or marine vessels

          f. Where there is considerable atmospheric oil such as in cooking areas

         g. Where there are machines generating electromagnetic radiation

         h. Where the air contains acidic or alkaline steam or a vapour

    

Protection against snow

    For details, consult your dealer.

System relocation

    Consult your Daikin dealer about remodelling and relocation.

4

Summary of Contents for RXYMQ3AV4A

























Reviews: