9
|
Electrical installation
Installer reference guide
47
4 35 35
3 RXTA30N2V1B
R32 split series
4P518023-7H – 2020.08
9 Electrical installation
In this chapter
9.1 About connecting the electrical wiring
Before connecting the electrical wiring
Make sure:
▪
The refrigerant piping is connected and checked
▪
The water piping is connected
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
9.1.1 Precautions when connecting the electrical wiring
WARNING
Appliance shall be installed in accordance with national wiring regulations.
DANGER: RISK OF ELECTROCUTION
INFORMATION
Also read the precautions and requirements in the
5].
INFORMATION
"9.1.3 Specifications of standard wiring components"
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
Summary of Contents for RXTA-N
Page 69: ......
Page 70: ......
Page 71: ......
Page 72: ...4P518023 7H 2020 08 Copyright 2019 Daikin Verantwortung f r Energie und Umwelt...