4
x
Peak output
FA ROTEX Solaris RPS4 -
04/2016
15
4.2.5 Fit the covering hood
1. Fit the cover and align it. Make sure that the cover is pushed
under the control unit housing so that there is an evenly
spaced joint all around the control unit.
2. Fix the cover to the control unit on both sides with
countersunk screws.
3. Fasten the cover to the cylinder connecting bracket
underneath. To do this, carefully screw in the self-tapping
fixing screw (pre-fitted on the cover) through the recess in the
lower part of the front of the housing and then fit the cover
cap.
Fig. 4-32 Work step 1
Fig. 4-33 Work step 2
Fig. 4-34 Work step 3
Fig. 4-35 Completely installed RPS4
