Mounting
EN
18
FA Daikin/ROTEX PG - 05/2017
008.15 442 44_01 - EN
5.2
Mounting the product
5.2.1
Mounting the product to a module manifold
1. Remove the insulation.
2. Screw the pump assembly to module manifold.
3. Screw the pipes of the heating circuit to the top connections (no
mechanical stress).
4. Fit the complete insulation.
5.2.2
Wall mounting
NOTICE
MECHANICAL LOADS AND STRESS
•
Verify that the product is not subjected to mechanical loads and stress when
connecting the product.
•
If necessary, install a corrugated pipe compensator to compensate for
mechanical stress or tension.
Failure to follow these instructions can result in equipment damage.
NOTICE
MECHANICAL LOADS AND STRESS
•
Verify that the product is not subjected to mechanical loads and stress when
mounting the product to the wall.
Failure to follow these instructions can result in equipment damage.
Summary of Contents for Rotex PGMK
Page 25: ......
