('íéðííì
2SHUDWLRQý0DQXDO
5RRPý$LUý&RQGLWLRQHUVý-ý6HULHV
êì
8
The air conditioner operates with the settings of your
choice.
From the next time on, the air conditioner will operate
with the same settings.
1
2
Press
MODE
and select a mode.
l
Each pressing of the button advances the mode setting
in sequence.
<FTK>
Press
ON/OFF
.
Then OPERATION lamp lights up.
n
To stop:
Press
ON/OFF
once again.
Then OPERATION lamp goes off.
n
To change the temperature setting:
To change the air flow rate setting:
AUTO
•
DRY
•
COOL
•
HEAT
•
FAN Operation
NOTE
<Note on HEAT mode operation>
Since this air conditioner heats the room by taking heat from
outdoor air to indoors, the heating capacity becomes smaller in
lower outdoor temperatures. If the heating effect is insufficient, it
is recommended to use another heating appliance in
combination with the air conditioner.
The heat pump system heats the room by circulating hot air
around all parts of the room. After the start of heating operation,
it takes some time before the room gets warmer.
In heating operation, frost may occur on the outdoor unit and
lower the heating capacity. In that case, the system switches
into defrosting operation to take away the frost. During
defrosting operation, hot air does not flow out of indoor unit.
<Note on DRY mode operation>
This operation dehumidifies the indoor air when it is humid.
<Note on AUTO operation>
In AUTO operation, the system selects a temperature setting
and an appropriate mode (COOL or HEAT) based on the room
temperature at the start of the operation.
The system automatically reselects setting at a regular interval to
bring the room temperature to user-setting level.
If you do not like AUTO operation, you can select manually,
you like the mode and setting.
DRY or FAN mode
The temperature
setting is not vari-
able.
AUTO or HEAT or COOL mode
Press
to raise the temperature and
press
to lower the temperature.
Set to the temperature you like.
Press
FAN
.
DRY mode
The air flow rate
setting is not
variable.
AUTO or HEAT or COOL or FAN mode
Five levels of air flow rate setting from
"
" to "
"plus "
" are available.
n
To change the air flow direction:
(See page 10.)
<FTX>
l
At smaller air flow rates, cooling or heating effect is also
smallwer.
Displa
y
ON
OFF
C
Displa
y
Displa
y
