background image

('íéðííì

2SHUDWLRQý0DQXDO

5RRPý$LUý&RQGLWLRQHUVý-ý6HULHV

êä

16

Case

Operation does not start soon.

l

When ON/OFF button was
pressed soon after operation
was stopped.

l

When the mode was reselected.

Hot air does not  flow out  soon
after the start  of heating
operation.

The heating  operation  stops
suddenly and a flowing  sound  is
heard.

The outdoor unit  emits water or
steam.

Mists come out  of  the  indoor
unit.

The indoor unit  gives out  odour .

The outdoor  fan  rotates  while
the air conditioner  is not  in
operation.

The operation stopped
suddenly.
(OPERATION lamp is on)

l

These cases are not troubles.

The following cases are not air conditioner troubles but have some reasons. You may just
continue using it.

Explanation

l

This is to protect the air conditioner.
You should wait for about 3 minutes.

l

The air conditioner is warming up. You should wait for 1
to 4 minutes.
(The system is designed to start discharging air only
after it has reached a certain temperature.)

l

The system is taking away the frost on the outdoor unit.
You should wait for about 3 to 8 minutes.

n

In HEAT mode

The frost on the outdoor unit melts into water or
steam when the air conditioner is in defrost
operation.

n

In COOL or DRY mode

Moisture in the air condenses into water on the cool
surface of outdoor unit piping and drips.

n

This happens when the air in the room is cooled into
mist by the cold air flow during cooling operation.

n

This happens when smells of the room, furniture, or
cigarettes are absorbed into the unit and discharged
with the air flow.
(If this happens, we recommend you to have the indoor
unit washed by a technician.   Consult the service shop
where you bought the air conditioner.)

n

After operation is stopped:

The outdoor fan continues rotating for another 30
seconds for system protection.

n

While the air conditioner is not in operation:

 When the outdoor temperature is very high, the out
door fan starts rotating for system protection.

n

For system protection, the air conditioner may stop
operating on a sudden large voltage fluctuation.
It automatically resumes operation in about 3 minutes.

Trouble Shooting

Summary of Contents for ROOM AIR CONDITIONERS


















Reviews: