background image

2SHUDWLRQý0DQXDO

('íéðííì

êç

5RRPý$LUý&RQGLWLRQHUVý-ý6HULHV

13

Press  

SENSOR

 While the air conditioner

is operating. (The Sensor lamp lights up.)

n

To cancel  the  "Intelligent Eye",

press  

SENSOR

 . (The Sensor lamp goes off.)

[EX.]

1

Intelligent Eye

n

Adjusting the angle of the
Intelligent-eye sensor

You can adjust the angle of the Intelligent-eye
sensor to remove the detection area.
(Adjustable angle: 15˚ to right and left of
centre)

Gently push and slide the sensor to adjust
the angle.

After adjusting the angle, gently wipe the
sensor with a clean cloth, being careful not to
scratch the sensor.

CAUTION

Do not hit or violently push the Intelligent-eye sensor. This

can lead to damage and malfunction.

"Intelligent Eye" is the infrared sensor which detecs the
human movement.

Intelligent-eye
sensor

15˚

15˚

Moving the sensor to the left

Moving the sensor to the right

When somebody in the room

 Normal operation

(The sensor lamp lights up.)

When nobody in the room

 20 min. after, start save operation.*

(The sensor lamp goes off.)

Sombody back in the room

 Back to normal operation.

(The sensor lamp lights up again.)

"Intelligent Eye" is useful for
Energy Saving

* Save operation

l

Change the temperature –2˚C in heat/ +2˚C in cool/ +1˚C in
dry mode from set temperature.

l

Decrease the air flow rate slightly in fan operation.

Notes on  "Intelligent  Eye"

l

Saving operation will not go on during
powerful operation.

l

Night set mode (see page 11.) will not go on
during you use Intelligent Eye.

l

You can sleep more comfortablly by using
"Good Sleep Cooling Operation (G-SLEEP)"
function (see page 12.) at the same time.

Do not place large objects near the sensor.
Also keep heating units or humidifiers outside
the sensor's detection area.
This sensor can detect objects it shouldn't as
well as not detect objects it should.

CAUTION

l

Application range is as follows.

l

Sensor may not respond when you are 5m or
more away. (Check the application range)

l

Sensor detection sensitivity changes according
to indoor unit location, the speed of passersby,
temperature range, etc.

l

The sensor also mistakenly detects pets,
sunlight, fluttering curtains and light reflected
off of mirrors as passersby.

80˚

50˚

5m

50˚

5m

Vertical angle 40˚
(Side View)

Horizontal angle 50˚
(Top View)

Summary of Contents for ROOM AIR CONDITIONERS


















Reviews: