Trouble Shooting
•
Check the fan speed setting on your remote controller.
Refer to “Operation Procedure”.
•
Check for open doors or windows.
Shut doors and windows to prevent wind from coming in.
•
Check if there are too many occupants in the room during cooling operation.
•
Check if the heat source of the room is excessive during cooling operation.
•
Check if direct sunlight enters the room during cooling operation.
Use curtains or blinds.
• Check if the air flow angle is not proper.
Refer to “Operation Procedure”.
After-Sales Service and Warranty
After-sale Service
Danger
•
Refrigerant gas may produce a toxic gas if it comes in contact with fire such as from a fan, heater, stove or cooking device.
Exposure to this gas could cause severe injury or death.
Warning
•
Do not disassemble, modify or repair the unit.
This may cause water leakage, electric shock or fire.
Contact your local dealer.
•
Do not remove or reinstall the unit by yourself.
Incorrect installation may cause water leakage, electrical shock or fire.
Contact your local dealer.
•
When asking your local dealer to repair, inform related staff of the details as follows:
•
Model name and product No. of air conditioner
•
Shipping date and installation date
•
Malfunction:
Inform the staff of the defective details. (Malfunction code being displayed on the remote controller.)
•
Name, address, telephone number
•
Repair after the warranty term is expired
Contact your local dealer. If necessary to repair, pay service is available.
•
Minimum storage period of important parts
Even after a certain type of air conditioner is discontinued, we have the related important parts in stock for 9 years at least.
The important parts indicate parts essential to operate the air conditioner.
•
Recommendations for maintenance and inspection
Since dust collects after using the unit for several years, the performance will be deteriorated to some extent.
Disassembling and cleaning inside require technical expertise, so we recommend entering a maintenance and inspection
contract (at a cost) separate from normal maintenance.
•
Recommended inspection and maintenance cycles
[Note: The maintenance cycle is not the same as the warranty period.]
Table 1 assumes the following usage conditions.
1. Normal use without frequent starting and stopping of the machine.
(Although it varies with the model, we recommend not starting and stopping the machine more than 6 times/hour for
normal use.)
2. Operation of the product is assumed to be 10 hours/day and 2,500 hours/year.
12
3P477778-8G English
01_EN_3P477778-8G.indd 12
12/12/2018 3:31:24 PM
