Daikin REYQ72AATJ Series, Installation Manual

Page: 36 / 51

33 English
13 Air inlet/outlet
Check that the air inlet and outlet of the unit is not obstructed by
paper sheets, cardboard, or any other material.
14
4GEQTFVJGEQPVGPVUQHƂGNFUGVVKPI
Record them on the accessory REQUEST FOR THE INDICATION
label.
And attach the label on the back side of the front panel.
15 Record the installation date.
Record the installation date on the accessory
REQUEST FOR
THE INDICATION label.
And attach the label on the back side of the front panel.
15.2.
/QPKVQTKPIHWPEVKQPCPFƂGNFUGVVKPIU
6JGQRGTCVKQPQHVJGQWVFQQTWPKVECPHWTVJGTDGFGƂPGFD[EJCPIKPI
UQOGƂGNFUGVVKPIU0GZVVQOCMKPIƂGNFUGVVKPIUKVKUCNUQRQUUKDNGVQ
EQPƂTOVJGEWTTGPVQRGTCVKQPRCTCOGVGTUQHVJGWPKV
6JGUGVVKPIECPCNUQDGRGTHQTOGFXKCVJG2%EQPƂIWTCVKQPUQHVYCTG
Below relevant Monitoring mode (mode 1) and Field setting mode
OQFGUGVVKPIUCTGGZRNCKPGFKPFGVCKN*QYVQCEEGUUVJGOJQYVQ
EJCPIGVJGXCNWGQHVJGUGVVKPIUCPFJQYVQEQPƂTOVJGOKUGZRNCKPGF
KP/CMKPIƂGNFUGVVKPIUPVJCVEJCRVGTCPGZCORNG
is given on how to make a setting. It is advised to check this procedure
before accessing, checking and changing below settings.
1PEGVJGFGHCWNVUKVWCVKQPQHVJGUGIOGPVKPFKECVKQPKUEQPƂTOGFUGG
/CMKPIƂGNFUGVVKPIUQPRCIG|VJGOQFGCPFOQFGECP
be accessed.
Making settings is done via the master outdoor unit.
15.2.1. Mode 1
Mode 1 can be used to monitor the current situation of the outdoor
WPKV5QOGƂGNFUGVVKPIEQPVGPVUECPDGOQPKVQTGFCUYGNN
$GNQYVJGUGVVKPIUKPOQFGCTGGZRNCKPGF
=? UJQYUYJGVJGTVJGWPKV[QWCTGEJGEMKPIKUCOCUVGTUWD
or sub 2 unit
•
0QKPFKECVKQPWPFGƂPGFUKVWCVKQP
• 0=outdoor unit is master unit
• 1=outdoor unit is sub 1 unit
• 2=outdoor unit is sub 2 unit
Master, sub 1 and sub 2 indications are relevant in multiple
QWVFQQTWPKVU[UVGOEQPƂIWTCVKQPU6JGCNNQECVKQPQHYJKEJ
outdoor unit is master, sub 1 or sub 2 are decided by the
unit’s logic.
6JGOCUVGTWPKVOWUVDGWUGFVQKPRWVƂGNFUGVVKPIUKP
mode 2.
=? UJQYUVJGUVCVWUQHNQYPQKUGQRGTCVKQP
• 1=unit is currently operating under low noise restrictions
• 0=unit is currently not operating under low noise restric-
tions
Low noise operation reduces the sound generated by the
unit compared to nominal operating conditions.
Low noise operation can be set in mode 2. There are two
methods to activate low noise operation of the outdoor unit
system.
6JGƂTUVOGVJQFKUVQGPCDNGCPCWVQOCVKENQYPQKUGQRGTC
-
VKQPFWTKPIPKIJVVKOGD[ƂGNFUGVVKPI6JGWPKVYKNNQRGTCVGCV
the selected low noise level during the selected time frames.
The second method is to enable low noise operation based
QPCPGZVGTPCNKPRWV(QTVJKUQRGTCVKQPCPQRVKQPCNCEEGU
-
sory is required.
=? UJQYUVJGUVCVWUQHRQYGTEQPUWORVKQPNKOKVCVKQPQRGTCVKQP
• 1=unit is currently operating under power consumption
limitation
• 0=unit is currently not operating under power consump-
tion limitations
Power consumption limitation reduces the power consump-
tion of the unit compared to nominal operating conditions.
Power consumption limitation can be set in mode 2. There
are two methods to activate power consumption limitation of
the outdoor unit system.
6JGƂTUVOGVJQFKUVQGPCDNGCHQTEGFRQYGTEQPUWORVKQP
NKOKVCVKQPD[ƂGNFUGVVKPI6JGWPKVYKNNCNYC[UQRGTCVGCVVJG
selected power consumption limitation.
The second method is to enable power consumption
NKOKVCVKQPDCUGFQPCPGZVGTPCNKPRWV(QTVJKUQRGTCVKQPCP
optional accessory is required.
=? UJQYUVJGEWTTGPV6
e
target parameter position.
Refer to 15.3. Energy saving and optimum operation on
RCIG|HQTOQTGFGVCKNUCDQWVVJGEQPVGPVUQHVJKUXCNWG
=? UJQYUVJGEWTTGPV6
c
target parameter position.
Refer to 15.3. Energy saving and optimum operation on
RCIG|HQTOQTGFGVCKNUCDQWVVJGEQPVGPVUQHVJKUXCNWG
=? UJQYUVJGVQVCNPWODGTQHEQPPGEVGFKPFQQTWPKVU
It can be convenient to check if the total number of indoor
units which are installed match the total number of indoor
units which are recognized by the system. In case there is a
mismatch, it is advised to check the communication wiring
path between outdoor and indoor units (F1/F2 communica-
tion line).
=? UJQYUVJGVQVCNPWODGTQHEQPPGEVGFQWVFQQTWPKVU
It can be convenient to check if the total number of outdoor
units which are installed matches the total number of out-
door units which are recognized by the system. In case there
is a mismatch, it is advised to check the communication
wiring path between outdoor and outdoor units.
=? UJQYUVJGNCVGUVGTTQTEQFG
=? UJQYUVJGPFNCUVGTTQTEQFG
=? UJQYUVJGTFNCUVGTTQTEQFG
When the latest error codes were reset by accident on
an indoor unit user interface, they can be checked again
through this monitoring settings. For the content or reason
DGJKPFVJGGTTQTEQFGUGG'TTQTEQFGNKUVQPRCIG|
YJGTGOQUVTGNGXCPVGTTQTEQFGUCTGGZRNCKPGF&GVCKNGFKP
-
formation about error codes can be consulted in the service
manual of this unit.
=? UJQYUVJGEWTTGPVEQQNKPIEQOHQTVUGVVKPI5GG'PGTI[
UCXKPICPFQRVKOWOQRGTCVKQPQPRCIG|HQTOQTGFG
-
tails about this setting.
=? UJQYUVJGEWTTGPVJGCVKPIEQOHQTVUGVVKPI5GG'PGTI[
UCXKPICPFQRVKOWOQRGTCVKQPQPRCIG|HQTOQTGFG
-
tails about this setting.
B(1B0DLQB959B,0LQGG