Removal of Fan Motor / Outdoor Fan
Si01-881
6
Removal Procedure
2. Remove the outdoor fan.
Nut size : M8
When reassembling, fit the
D-cuts of the lock washer
and the shaft of fan motor.
1
Remove the nut and
remove the outdoor fan.
3. Remove the fan motor.
Be sure to remove the lower
screws first. If the upper
screws are removed first, the
fan motor may tilt or fall
because the center of its
gravity is toward the front.
It may cause injuries.
1
Remove the 4 screws
and remove the fan
motor.
Step
Procedure
Points
Lock washer
(R5438)
13 mm
(R12301)
(R12834)
D-cut
D-cut
Lock washer
(R12835)
(R5439)
