Si01-881
Removal of Fan Motor / Outdoor Fan
Removal Procedure
5
2. Removal of Fan Motor / Outdoor Fan
Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure
Points
1. Disconnect the each wire
harness.
Preparation
Remove the front panel
according to the "Removal of
the Outer Panels".
1
Disconnect the relay
connector for the fan
motor.
2
Disconnect the 2
terminals for the fan
motor capacitor (C1).
3
Unfasten the hook with
a flat screwdriver.
Put the fan motor lead wire
through the back of the fan
motor when reassembling so
as not to be entangled with
the outdoor fan.
4
Release the fan motor
lead wire from the
partition plate.
(R8330)
(R12811)
White
Red
Fan motor capacitor (C1)
(R5436)
Hook
(R3249)
Lead wire
Outdoor fan
(R12812)
Partition plate
