Daikin One+, Reference Manual

Page: 35 / 72

35
»
Use dip switches on the board
to configure the heater kit size.
Please refer to the installation
manual of these boards to locate
the dip switches.
»
Heater kit size configured with
dip switches will appear under
Installer Wizard > equipment setup
> air handler > heater kit > size (kW)
Enable ‘heater kit installed’ checkbox.
Installer Wizard > equipment setup
> air handler > heater kit installed
»
‘heater kit’ sub-menu
appears on enabling ‘heater
kit installed’ checkbox
» Inside ‘heater kit’ sub-menu ‘heat
airflow trim’ value can be adjusted
How to Configure Humidifier on Modulating and
2-stage Furnaces
»
Refer to the
Humidifier in the furnace
section under
Installing Daikin
One + section for details on wiring humidifier to the furnace board
»
For 2-Stage furnace, Daikin One + supports ‘humidifier relay’
settings. It has the following options:
–
ON: Humidifier is turned on with heat demand
& humidification demand
–
OFF: Humidifier remains off (relay never closes).
»
For Modulating furnace, humidifier is turned ON with heat demand
& humidification demand.
How to Configure Heat Kit
Heater kit configuration varies based on the type of the Indoor units.
Full set-up
SYS
TE
M P
O
W
ER
-U
P
DVPVC, DVPTC, MBVC