26
English
Operation
MODE
Usage and Function
ANTI-
POLLEN
Reducing pollen levels
A gentle air current is created by switching every 5 minutes between the FAN setting “Standard”
and “Low” so that pollen can be drawn in and caught before it reaches the floor.
• Press
if you want to change the humidity level.
MOIST
Combating dry throat and skin
Humidity is automatically adjusted to be gentle on the throat and skin.
If the operating sound bothers you, the airflow rate range can be changed.
►
Page 31, 32
• As humidity is kept relatively high, if the
temperature difference between outdoors and
indoors is large, condensation may result.
• Humidity setting is set automatically. Target
humidity cannot be changed.
• If
is pressed when MOIST MODE is
active, MOIST MODE stops and AUTO FAN
MODE is activated.
100
90
80
70
60
50
40
30
0
30
25
20
15
10
Target humidity (%)
Room temperature (°C)
60
% 50
%
40%
70%
Room conditions and target humidity
CIRCULATOR
When you want to circulate the air in the room
The air in the room is kept clean and local variations in temperature are suppressed. It is even
more effective if the unit is installed opposite an air conditioner.
The airflow rate is “High” for about 30 minutes after operation start, in order to circulate the air in the room.
After that, any temperature change around the unit is detected, and the airflow rate is automatically adjusted.
(There is no temperature adjustment function.)
•
If the indoor temperature is low, the airflow rate may not be “High”.
(To suppress any feelings of coldness caused by air currents)
01_EN_3P693798-1B.indd 26
2023/06/26 13:34:04
