13
Preparation Before Operation
Read First
WARNING
Be sure to stop the operation and remove the power supply
plug before installation. (Electric shock or injury may result)
1
Checking accessories
Deodorising filter
... 1
Attach to the unit before
operation.
►
Page 14, 15
Operation
Guide .......5
Under the unit
Operation manual
(this manual)
.......... 1
Under the unit
Casters
• Caster with lock ....... 2
• Caster without lock... 2
Caster screw (M3)
... 8
Under the louvre
2
Positioning the unit in the room
Before setting up, remove the fixing tape on the bottom
which is securing the power supply cord, then take out
the power supply cord.
Fixing tape (blue)
Power supply cord
At least 100cm
away from
ceiling
At least 30cm
away from wall
Air flow
At least 30cm
away from wall
*
* Keep distance from the wall so that the power supply
cord doesn’t bend tightly. (May cause damage or
heating)
Pointers for good positioning
•
Choose a place from where airflow can reach all areas of
the room.
• Place the unit on a stable surface. If the unit is placed on an
unstable surface, vibrations from the unit may be amplified.
• If interference from the power circuit inside the unit or
cables causes disturbance of TV screen images or the
emission of static noise from nearby radios or stereos,
move the unit to at least 2m away from the device.
Keep cordless phones and radio-controlled clocks away
from the unit also.
• This unit contains radio transmitter; the minimum
separation distance between the radiating part of the
equipment and the user is 30cm.
Attention
• To avoid staining of walls, position the unit in accordance
with the positioning measurements in the illustration.
However, note that since this unit draws in dirty air, certain
types of wall may become stained even if the
measurements in the illustration are adhered to.
In such cases, be sure to maintain sufficient distance
between the unit and the wall.
• When used for a prolonged period in the same place, the
base of the unit and the floor and surrounding walls may
become stained as air is drawn into air inlets near the base
of the unit. Periodic cleaning is recommended.
•
Place the unit on a flat surface.
01_EN_3P693798-1B.indd 13
2023/06/26 13:33:58
