1
3
Preparation Before Operation
Read First
2
Positioning The Unit
Before setting up, remove the fi xing tape on
the bottom which is securing the power supply
cord, then take out the power supply cord.
Remove the fi xing tape on the pre-fi lter (front)
as well.
Pointers for good positioning
• Choose a position from which airfl ow can reach all areas of the
room.
• Place on a stable surface. If the unit is placed on an unstable
surface, vibrations from the unit may be amplifi ed.
• If interference from the power circuit inside the unit or cables
causes disturbance on your TV screen images or the emission
of static noise from nearby radios or stereos, move the unit to
at least 2m away from the device.
Keep cordless phones and radio-controlled clocks away from
the unit also.
• This unit contains radio equipment; the minimum separation
distance between the radiating part of the equipment and the
user is 30 cm.
Attention
• To avoid staining of walls, position the unit in accordance with
the positioning measurements in the illustration. However,
please note that since this unit draws in dirty air, certain types
of wall may be stained even if the measurements are adhered
to. In such cases, make sure to maintain suffi cient distance
between the unit and the wall.
• When used for a long period of time in the same location, the
fl oor and surrounding walls may get stained as air is drawn into
air inlets near the base of the unit. It is recommended to clean
the unit periodically.
• Place the unit on a fl at surface.
Tape [blue]
Power supply
cord
At least
100cm from
the ceiling
Air fl ow
At least 30cm
from the wall
At least 30cm
from the wall
※
Please leave some distance from the wall to ensure power supply cord does not bend forcibly. (risk of damage and overheat)
1
Checking Accessories
Attach to the unit before operation.
Deodorising fi lter ......... 1 unit
Operation manual (beneath the unit).....1 unit
WARNING
Be sure to stop operation and remove the power
supply plug before installation. (Electric shock or
injury may result)
Pre-fi lter
(front)
1-OM-MC80ZVM-DAIKIN-3P690982-1 EN.indd 12
1-OM-MC80ZVM-DAIKIN-3P690982-1 EN.indd 12
29/12/2022 5:34:30 PM
29/12/2022 5:34:30 PM
