background image

6

1

 

About the child proof lock lamp

• 

When lit up, operations will be restricted. When buttons are pressed, only a tone (3 short beeps) will sound, preventing misoperation by small children. 

 

Page 13

2

 About the streamer lamp

• 

This lamp lights up when the streamer is operating. The streamer operates depending on the degree of air impurity.

•  If the hissing sound generated by the streamer discharge or the smell of ozone bother you, set streamer output to low. 

 

Page 14

3

 

About the dust sensor lamp / PM2.5 INDICATOR lamp 

• 

After operation is started, the lamp will light green for the fi rst minute 
(approx.) regardless of air impurity level.

• 

The responsiveness of the dust/PM2.5 sensor may be poor during FAN setting “Turbo” or when 

airfl ow is high in AUTO FAN MODE. The strong airfl ow causes dust to be drawn into the air 

inlets before it can be detected by the dust/PM2.5 sensor. This is normal (not a malfunction).

• 

If the responsiveness of the dust/PM2.5 sensor is poor, change the sensitivity 
setting of the sensor. 

 

Page 15

Dust/PM2.5 sensor detection range

Detectable matter

house dust, tobacco smoke, pollen, mites, pet hairs, diesel particulate matter

Sometimes detectable

steam, oil smoke

4

 About the odour sensor lamp

• 

If operation is started immediately after the power supply plug is inserted, the 
lamp will light green for the fi rst minute (approx.).

• 

If odour intensity levels are unchanging, the sensor may not respond even if there 
is a strong odour in the air.

• 

The sensor may not respond to some odours such as pet odours (excluding ammonia), garlic odour, etc.

• 

As odour perception varies by person, in some cases an odour may be sensed 
even when the lamp is green.

If the odour bothers you, switch to manual airfl ow rate, and select a high airfl ow 

rate. 

 

Page 10

The ambient odour level in the fi rst minute after the unit is plugged in serves as 

the reference level upon which the sensitivity of the odour sensor is determined. 
Insert the power supply plug when the air is clean (odour-free).

Odour sensor detection range

Detectable matter

tobacco odours, cooking odours, pet odours, toilet 
smells, waste smells, mould odours, sprays, alcohol

Sometimes detectable

sudden changes in temperature/humidity, steam, oil 
smoke, gas emitted from combustion-based heating 
devices

Read First

Operating/Indicator panel

When a lamp is blinking

 

 

Page 21

1

 

Child proof lock lamp [orange]

Lamp will be lit when the Child proof lock active.

MODE lamps [green]

Indicate the MODE in operation.

ON/OFF lamp [green]

Lamp will light up when the power is ON.

FAN lamps [green]

Indicates the active FAN setting (4 settings: Quiet, Low, Standard, Turbo).

3

 

Dust sensor lamp / PM2.5 INDICATOR lamp

Light indicates the volume of ambient dust.

• 

Green indicates that the air is clean.

•  The dust sensor lamp / PM2.5 INDICATOR lamp can detect small (approx. 1.0-2.5μm) and 

large (approx. 2.5μm and above) dust particles. The PM2.5 INDICATOR lamp light in 

response to small particles and the dust lamp lights in response to large dust particles.

Green

Orange

Red

Low

High

Lamp 

colour

Dust

[Dust sensor lamp]

Low

High

Green

Green

Lit up

Yellow Orange

Red

Purple Brown

Dust

[PM2.5 INDICATOR lamp]

2

 

Streamer lamp [blue]

Lights up when the streamer is active.

4

 Odour sensor lamp

Indicates the intensity of odours in 3 
colours: green, orange, red.

• 

Green indicates that the air is clean.

Green

Orange

Red

Low

High

Lamp 

colour

Odours

01_EN_3P549981-1B.indd   6

12/12/2019   2:08:23 PM

Summary of Contents for MC55VBFVM





























Reviews: